This high-speed ash processor is a unique all-in-one system designed to automatically separate the cremated remains and any ferrous metals. It is quiet and dust free in operation and is configured to automatically fill both temporary and permanent urns. Typical cycle time is only 2.5 minutes.
The cremator ash pan fits directly into the tipping unit to reduce handling, where a simple rotating movement of the sealed drum transfers the remains into the metals separation chamber without risk of dust or loss of remains. The separated remains then cascade into the main centrifuge chamber where they are swiftly processed and expelled via the collection chute into the positioned urn.
The urn or collection receptacle is positioned on a pneumatically powered shelf, which is raised up to the seal once the start button is pressed. This ensures a good seal without the risk of crushing temporary urns. The lift device allows the use of urns from 125 mm – 300 mm tall.
The built-in workstation provides an area to transfer ashes to alternative urns if required whilst also offering dedicated lighting and vacuum filtration.
The suction/filtering unit consists of:
- Pre-filter (as first step of filtration);
- Pre-filter automatic cleaning shaking system
- Suction fan
- Dust suction unit.
Air extracted by the suction unit passes through the first filter, which retains part of the dust before being passed through the fan after which it finally exits into the environment through a HEPA filter on the lateral side of the vacuum desk cabinet. Once filtered the air is released via the lateral soundproofed duct.
Width 700mm (27.8in)
Length 1850mm (72.8in)
Height 1750mm (69in)
Thickness of wall soundproofing 50mm (2in)
Total weight 950Kg (2094lb)
Power supply 220v
Cylinder diameter 32mm (1.26in)
Cylinder stroke 100mm (3.94in)
Number of containers 2
Installed power 2.8kW